No products in the cart.
Menampilkan 1–16 dari 27 hasilDiurutkan menurut yang terbaru
- M12 Wiring Harness Cable, 8 pin, 6ft (1.8m) for Wzzard Intelligent Nodes
- Industrial Communication
- 8 pin
- Pigtail Cable, 6ft (1.8m) for Wzzard Intelligent Nodes
- Industrial Communication
- 8 Pin
- All-in-one structure in a small size
- Sensing Aperature: 10/24 mm
- Primary Current Range: 250A
- Output Type: 0-5V
- Accuracy: <2% of nominal primary current
- Bandwidth: 50/60 Hz
- UL, CSA, CE and RoHS available
*Harga Hubungi Kami
*Phase Out
- All-in-one structure in a small size
- Sensing aperature: 10/24 mm
- Primary Current Range: 50A
- Output Type: 0-5V
- Accuracy: <2% of nominal primary current
- Bandwidth: 50/60 Hz
- UL, CSA, CE and RoHS available
*Harga Hubungi Kami!
- Configurable user business logic data processing & display engine
- Comprehensive data outputs via MQTT, email, SMS and a variety of other services and database connections
- Integrates data from WZZARD, WISE, ADAM & third party devices
- Integrates data from internet feeds
- Cellular or Ethernet connection to IIoT system
- Acts as LAN to WAN bridge for third party device connection
- Two cellular antennas required to operate (sold separately)
- Cellular (EMEA/NATAM/Australia) and wired models available
- Configurable user business logic data processing & display engine
- Comprehensive data outputs via MQTT, email, SMS and a variety of other services and database connections
- Integrates data from WZZARD, WISE, ADAM & third party devices
- Integrates data from internet feeds
- Cellular or Ethernet connection to IIoT system
- Acts as LAN to WAN bridge for third party device connection
- Cellular (EMEA/NATAM/Australia) and wired models available
- Monitor refrigeration performance for early fault detection and regulatory compliance
- Includes everything to monitor chamber temperature, door open/close and current draw
- Snap & go set up - no downtime, disruption or cable runs
- Built-in Node-RED™ software tool for easy deployment
- Smartmesh IP wireless mesh for point-to-point self-healing reliability; more resilient as more nodes are added
- Easily scalable at any time to thousands of sensors
- Monitor current consumption to reduce energy costs
- Snap & go set up - no downtime, disruption or wiring/cable runs
- Built-in Node-RED™ software tool for easy deployment
- Smartmesh IP wireless mesh for point-to-point, self-healing reliability; more resilient as more nodes are added
- One gateway supports up to 100 wireless sensor nodes.
- Easily scalable at any time to thousands of sensors
- IP67 indoor/outdoor rated (Wzzard node)
- Monitor current and temperature to reduce energy costs
- Snap & go set up - no downtime, disruption or wiring/cable runs
- Built-in Node-RED™ software tool for easy deployment
- Smartmesh IP wireless mesh for point-to-point, self-healing reliability; more resilient as more nodes are added
- Easily scalable at any time to thousands of sensors
- IP67 indoor/outdoor rated (Wzzard node)
- J-type ungrounded thermocouple
- #10 or M4.5 screw mounting
- 20AWG, PFA insulation
- Lead-wire termination connection
- 91.4cm (36in) length
- Monitor temperature and vibration level of a motor or bearing
- Stick & Go set up – no downtime, disruption or wiring/cable runs
- Built-in Node-RED™ software tool for easy deployment
- Smartmesh IP wireless mesh for point-to-point, self-healing reliability; more resilient as more nodes are added
- Easily scalable at any time to thousands of sensors
- IP67 indoor/outdoor rated (Wzzard node)
- NEMA TS2
- Industrial monitor node with 3 analog inputs, 1 digital input, internal temperature
- Ultra-low power 802.15.4e SmartMesh IP technology
- Communicates with SmartSwarm-342 gateway via highly scalable and reliable wireless mesh networks
- Rugged, IP67 rated, fiber reinforced polyester PBT enclosure
- MQTT and JSON IoT protocol to application platform
- Sensor interface cable and antenna included
- Industrial node with 6 digital inputs, internal temperature
- Ultra-low power 802.15.4e SmartMesh IP technology
- Communicates with SmartSwarm-342 gateway via highly scalable and reliable wireless mesh networks
- Connect to industry standard analog or digital sensors
- Rugged, IP67 rated, fiber reinforced polyester PBT enclosure
- MQTT and JSON IoT protocol to application platform
- Sensor interface cable and antenna included
- Industrial monitor node with 3 analog inputs, 1 digital input, internal temperature
- Ultra-low power 802.15.4e SmartMesh IP technology
- Communicates with SmartSwarm-342 gateway via highly scalable and reliable wireless mesh networks
- Rugged, IP67 rated, fiber reinforced polyester PBT enclosure
- MQTT and JSON IoT protocol to application platform
- Sensor interface cable and antenna included